EngiRankOpen app
Question bank

GATE CE previous year questions, topic-wise and year-wise

Past GATE Civil Engineering questions are the best guide to what the exam tests and how. Practise them by subject and topic, or as full papers, with a worked solution for each.

Practise by subject

Each subject page covers its topics, high-yield concepts and sample questions you can try right now.

Practise by year

Full GATE CE papers from recent years are available in the app as timed mocks with GATE marking, or as untimed practice, including both CE sessions where the exam was held in two shifts. More years are added regularly.

Open year-wise papers

Official question papers and answer keys are published by the GATE organising institute on its website. EngiRank is an independent study app and is not affiliated with IISc or the IITs.

Try sample questions

A few original practice questions written in the GATE style, one from each technical area. Answer, check, and read the solution. The app has many more.

NAT1 markNo negativeEnvironmental

Question 1 · Numerical answer · Original GATE-style question

A wastewater sample is diluted to 2% by volume in a BOD bottle. Initial DO is 8.0 mg/L and DO after 5 days at 20 °C is 3.5 mg/L. The BOD of the sample (mg/L) is ____.
NAT1 markNo negativeGeotech

Question 2 · Numerical answer · Original GATE-style question

A fully saturated soil has void ratio 0.6 and specific gravity of solids 2.7. Its water content (%) is ____ (round off to one decimal).
MCQ2 marks−2/3Structures

Question 3 · Single correct option · Original GATE-style question

A simply supported prismatic beam of span and flexural rigidity carries a UDL over the full span. The maximum deflection is
NAT2 marksNo negativeWater Resources

Question 4 · Numerical answer · Original GATE-style question

A rectangular channel 4 m wide carries uniform flow at depth 1 m. Bed slope is 0.0004 and Manning's = 0.015. The discharge (m/s) is ____ (round off to two decimals).
NAT1 markNo negativeTransportation

Question 5 · Numerical answer · Original GATE-style question

For a design speed of 72 km/h, reaction time 2.5 s and longitudinal friction coefficient 0.35 on a level road, the stopping sight distance (m) is ____ (take g = 9.81 m/s², round off to one decimal).
MSQ1 markNo negativeMaths

Question 6 · One or more correct options · Original GATE-style question

For , which of the following is/are TRUE?
MCQ1 mark−1/3Structures

Question 7 · Single correct option · Original GATE-style question

As per IS 800:2007, the partial safety factor for material, , for resistance governed by yielding is
NAT1 markNo negativeGeomatics

Question 8 · Numerical answer · Original GATE-style question

The degree of a simple circular curve of radius 300 m, defined on a 30 m arc, is ____ degrees (round off to two decimals).
MCQ2 marks−2/3Geotech

Question 9 · Single correct option · Original GATE-style question

A clay layer takes time to reach 50% consolidation under double drainage. If the same layer is drained only at the top, the time to reach 50% consolidation is
NAT2 marksNo negativeEnvironmental

Question 10 · Numerical answer · Original GATE-style question

Using Stokes' law, the settling velocity (mm/s) of a discrete spherical particle of diameter 0.05 mm and specific gravity 2.65 in water (kinematic viscosity m²/s) is ____ (take g = 9.81 m/s², round off to two decimals).

How to use GATE CE PYQs well

  1. Start topic-wise. Finish a topic's past questions right after revising it, while the concepts are fresh.
  2. Read every solution, even when you were right. Often there is a faster method that saves a minute in the exam.
  3. Track your accuracy by topic. Two hours on a 50% topic usually gains more marks than two hours on a 90% one.
  4. Switch to full papers in the last phase. Year-wise papers under a 3-hour timer build pace and the judgement to skip.
  5. Respect negative marking. Only MCQs carry negative marks, so a guess on an MSQ or NAT costs nothing, while a wild guess on an MCQ does.